Hei
Panin tähele, et ennem käivitamist näitab mul D3 mingit kella märki ja numbrit 27, seal kus odomeeter on.
Mida see tähendab? 27 päeva hoolduseni?
Kella märk odomeetri aknas
Vaata kasutusjuhendist järgi!
Kui on kadunud,siis tasuta saab elektroonilisele kujul
http://topix.landrover.jlrext.com/topix ... lookupForm
Kui on kadunud,siis tasuta saab elektroonilisele kujul
http://topix.landrover.jlrext.com/topix ... lookupForm
Viimati muutis landy, K Mai 14, 2014 20:13, muudetud 1 kord kokku.
MTÜ Eesti Land Roveri Klubi
-----------------------------------
SERIES II A 109"( '70 )-"Tindiplekk" / LR90 ( '88 )- "Inetu Pardipoeg" + palju unistusi
Kristjan Vaarmann (+372)5010599 kristjan.vaarmann@landroverclub.ee
Land Rover'iga nakatatud ja mudas müttamas aastast 1996!
-----------------------------------
SERIES II A 109"( '70 )-"Tindiplekk" / LR90 ( '88 )- "Inetu Pardipoeg" + palju unistusi
Kristjan Vaarmann (+372)5010599 kristjan.vaarmann@landroverclub.ee
Land Rover'iga nakatatud ja mudas müttamas aastast 1996!
-
- Edasi, ainult Hi-Lift'iga !
- Postitusi: 29
- Liitunud: N Juun 06, 2013 10:35
- Asukoht: Lõuna Eesti, Tallinn, Internet
Saigi RTFM'ist vastuse
Selle järgi ongi tegemist hooldusteemaga.
Kleebin siia ka selle inglise keelse selgituse:
----
If the System Check Control Button, is pressed
before the five seconds have elapsed, a clock
symbol appears and the next service date is
displayed (dd.mm.yy) in place of the
countdown feature. This displays for a further
five seconds.
If the service/inspection date is passed before
the countdown feature has reached zero, the
clock symbol will be displayed for five seconds
at the start of every starter sequence to make
the driver aware of the need to check the
vehicles service requirements.
----
Selle järgi ongi tegemist hooldusteemaga.
Kleebin siia ka selle inglise keelse selgituse:
----
If the System Check Control Button, is pressed
before the five seconds have elapsed, a clock
symbol appears and the next service date is
displayed (dd.mm.yy) in place of the
countdown feature. This displays for a further
five seconds.
If the service/inspection date is passed before
the countdown feature has reached zero, the
clock symbol will be displayed for five seconds
at the start of every starter sequence to make
the driver aware of the need to check the
vehicles service requirements.
----